GI / GL slit strip for export fabrication — confirm mother coating, slit width/tolerance, edge quality, coil limits and packing.
Send grade, standard, dimensions, and delivery requirements for a matched product quotation.
| Property | Value |
|---|---|
| Product identity | |
| Product | Galvanized / Galvalume Steel Strip — Slit Coil 30–600 mm |
| Material | Carbon Steel |
| Product form | Strip |
| Standards and classification | |
| Standard | Governing product standard and edition; confirm on quotation/PO. |
| Dimensions | |
| Thickness | Nominal thickness and tolerance; confirm on quotation/PO. |
| Width | Nominal width and tolerance; confirm on quotation/PO. |
| Surface and coating | |
| Substrate | Carbon Steel |
| Metallic coating | Coating type, designation or mass, units, and side distribution; confirm on PO. |
| Surface finish | Required finish, treatment, and acceptance criteria; confirm on quotation/PO. |
Galvanized and galvalume slit strip for purlins, cable tray, flashings, ERW input and other roll-formed accessories after downstream review. Specify mother-coil coating, slit width, width tolerance, burr, camber and edge condition on one strip family page instead of spawning thin GI/GL strip clones for every width band. A full-width mother coil remains a separate delivery choice.
Compare color, surface, profile, and dimensions before requesting a quote.
RFQ documents & delivery
Packing, MTC, and inspection path — include them in your RFQ for an actionable quote.
Agree mother-coil grade and coating, thickness, slit width and tolerance, edge condition, burr, camber, coil ID/OD, weight and edge protection in the PO or slitting inspection plan. Purlin, cable-tray and ERW applications require downstream forming/welding review; a full-width mother coil must not be represented as finished strip. No burr, camber or weldability result is implied without an order-specific criterion.
Representative export packing and loading evidence. Final packing follows the approved order.
FAQ
Mother coil is the full-width GI or GL input. Strip is produced after slitting into agreed mults, with its own width, tolerance, edge and coil limits. State the delivery form on the RFQ.
Specify mill or slit edge, acceptable burr and camber basis, edge protection, and the downstream forming or welding route. These controls depend on the line and application.
It can be reviewed for those uses when mother-coil grade, coating, slit tolerance, burr/camber and weld or forming requirements are accepted by the downstream team.
Confirm line payoff, crane/handling and container limits first, then state individual coil weight, ID/OD and packing orientation in the order.
Укажите марку или стандарт, размеры, количество, порт назначения и применение. Добавьте требования к поверхности, обработке, упаковке или инспекции, если они влияют на заказ.
Основой служат спецификация проекта и конечное применение. Укажите требуемые ссылки, например SGCC, DX51D+Z, DX51D+AZ, S250GD, а также условия формовки, сварки, коррозии или эксплуатации.
Related products
Compare related grades and product forms for your application and order requirements.
750 / 840 / 900 / 1050 mm… · Sheet
Запросить техническое КП
Talk with our team about Galvanized / Galvalume Steel Strip — Slit Coil 30–600 mm availability, dimensions, and shipment timing.
