DC01 Galvanized Steel Sheet

DC01-base galvanized sheet for cut-to-length forming, HVAC parts, cabinets, and general sheet-metal fabrication. Confirm the coated-product grade, zinc coating, thickness, width, length, flatness, surface, and packing.

Request a Quote WhatsApp Contact Technical Sales

PRODUCT ORDER SPECIFICATION CONFIRM FOR QUOTATION

KEY SPECIFICATIONS

Substrate: Carbon Steel
Standard: Governing product standard and edition; confirm on quotation/PO.
Metallic coating: Coating type, designation or mass, units, and side distribution; confirm on PO.
Thickness: Nominal thickness and tolerance; confirm on quotation/PO.
Width: Nominal width and tolerance; confirm on quotation/PO.
Surface finish: Required finish, treatment, and acceptance criteria; confirm on quotation/PO.

Technical classification

Material / substrate: Carbon Steel
Form: Sheet
Surface: Galvanized, Method to Confirm

Product specifications

Send grade, standard, dimensions, and delivery requirements for a matched product quotation.

Product specifications
Property	Value
Product identity
Product	DC01 Galvanized Steel Sheet
Material	Carbon Steel
Product form	Sheet
Standards and classification
Standard	Governing product standard and edition; confirm on quotation/PO.
Dimensions
Thickness	Nominal thickness and tolerance; confirm on quotation/PO.
Width	Nominal width and tolerance; confirm on quotation/PO.
Surface and coating
Substrate	Carbon Steel
Metallic coating	Coating type, designation or mass, units, and side distribution; confirm on PO.
Surface finish	Required finish, treatment, and acceptance criteria; confirm on quotation/PO.

Overview

DC01 describes a commercial cold-forming base, while the finished galvanized sheet must be ordered to an agreed coated-product grade and standard. This distinction matters for coating reporting, tolerances, and the final MTC. Use this page for cut-to-length sheet or blanks rather than mother coil. Send thickness, width, length, flatness or edge-wave requirement, surface treatment, quantity, destination port, and the punching or bending route. Zinc coating class and base thickness should be stated separately. For visible panels or stored bundles, add appearance, oiling or passivation, interleave, protective film, and moisture-protection requirements. Bundle weight, skid format, markings, inspection scope, and document wording are confirmed from the purchase order.

Product scope

Base-grade and coated-product requirements are stated separately
Sheet flatness, bundle format, and surface protection are RFQ-controlled

Applications

HVAC ducts and sheet-metal parts
Cabinets, enclosures, and light forming
Cut-to-length distributor and fabrication stock

Surface options

Regular, minimized, or zero spangle as ordered
Passivated, Cr-free, oiled, or dry surface as ordered
Skin-pass when flatness or appearance requires it

Processing & form

Cut-to-length sheet and blanks
Slitting before cut-to-length when required
Protective interleave or film by purchase order
Export bundles sized for the unloading plan

Product selection tools

Compare color, surface, profile, and dimensions before requesting a quote.

RFQ documents & delivery

Packing, MTC, and inspection path — include them in your RFQ for an actionable quote.

Packing & delivery

Export packing options

Seaworthy packing uses moisture barriers, edge protection, steel strapping, and skids as appropriate. Coil orientation or bundle weight, marks, loading method, and destination requirements are confirmed with the order.

Quality assurance

Quality documents

Before production, agree the governing standard, grade, coating, dimensional tolerances, and inspection plan. EN 10204 3.1 MTC, coating or paint records, and third-party inspection can be included when required by the order.

Export packing & loading evidence

Representative export packing and loading evidence. Final packing follows the approved order.

FAQ

What do I need for a firm DC01 GI sheet quotation?

Send base grade DC01 (or equivalent), zinc coating mass, thickness, width, length or blank size, flatness needs, surface, quantity, destination port, packing, and MTC/inspection requirements.

Is this page for sheet or round bar?

This page is galvanized flat sheet only. If you need galvanized bar or section products, open the matching form page instead of this sheet SKU.

When should I choose sheet instead of coil?

Choose sheet when your line needs fixed blanks, limited decoiling capacity, or cut-to-length packages. Choose coil when continuous roll forming or high-yield cutting is preferred.

Can DC01 GI sheet be painted or roll-formed later?

Yes when coating, surface, and flatness suit the process. For factory pre-painted feed, request PPGI / PPGL coil with RAL and paint system on the color-coated hub.

What information is needed to quote DC01 Galvanized Steel Sheet?

Send the required grade or standard, dimensions, quantity, destination port and application. Add surface, processing, packing or inspection requirements when they affect the order.

How should I select the grade or standard for DC01 Galvanized Steel Sheet?

Use the project specification and end use as the starting point. Share any required reference such as DC01, EN 10130 (base DC01 class), EN 10346 / ASTM A653 coating practice as agreed, together with forming, welding, corrosion or service conditions, so the quotation follows the intended application.

Request a quote for DC01 Galvanized Steel Sheet

Send grade, size, quantity, and destination port for a practical export quotation.

Request a Quote Check details on WhatsApp

RFQ form: itemized quote, MTC and packing requirements
WhatsApp: quick check of specifications, quantity and port