DC01 Galvanized Sheet 適用於成型、覆面與出口項目板材供應。採購方可先確認牌號、尺寸、表面狀態、包裝與目的港後再詢價。常見參考牌號包括 DC01。
| 參數 | 取值 |
|---|---|
| Product form | Hot-dip galvanized steel sheet (cut length) |
| Base grade | DC01 / commercial cold-forming base |
| Coating | Zinc mass class per PO (e.g. Z60–Z275 class) |
| Thickness | Thin gauge range — confirm PO tolerance |
| Surface | Spangle/oiling/passivation as ordered |
| Documents | MTC EN 10204 3.1 with coil/heat identity |
| Export packing | Sheet bundles or wooden cases with moisture protection |
| Product | Hot-dip galvanized steel sheet (GI cut-to-length) |
| Base grade | DC01 commercial forming base (or agreed equivalent) |
| Standards | EN 10130 (base) / EN 10346 coated product as contracted |
| Zinc coating | Z60–Z275 class options by order confirmation |
| Dimensions | Thickness × width × length; cut-to-length blanks as ordered |
| Surface | Regular or minimized spangle; oiled or passivated if required |
| Flatness | Confirm flatness and edge-wave limits for punching/bending |
| Documents | EN 10204 3.1 MTC; coating data when contracted |
| Packing | Seaworthy sheet packs with edge and moisture protection |
DC01 Galvanized Sheet 由卿山鋼鐵組織供應，面向成型、覆面與出口項目板材供應。該板材可在發貨前就牌號、尺寸範圍、表面狀態、包裝方式與質保文件進行規格核對。常見參考牌號包括 DC01。採購團隊可結合目的港與裝卸計劃，對齊厚度或截面尺寸、寬度或外徑（如適用）、長度公差、表面防護與包裝形式。每批貨可按訂單匹配質保書、裝櫃記錄與第三方檢驗安排，降低規格偏差與出運風險。請提供所需牌號、尺寸、數量、用途、檢驗要求與目的港，銷售團隊將據此匹配可執行的出口供貨方案。請確認牌號、尺寸、數量、包裝方式、質保書與目的港。銷售團隊將據此匹配可執行的出口供貨方案與清晰的詢價輸入。
皺紋/啞光、波紋/梯形、分條寬度寫進 RFQ 與工具頁，不另開近重複產品頁。
詢價文檔與交付
包裝、MTC 與驗貨路徑 — 寫入詢盤可加快可執行報價。
採用適合海運出口的包裝，並提供打包與裝櫃照片。
每批貨可按訂單配套 MTC、檢驗協助與出口資料。
交付可信度
固定交付證明 + 本產品 applications 對齊的用途說明 — 詢價前確認庫存、驗貨與終端場景。
常見問題
Send base grade DC01 (or equivalent), zinc coating mass, thickness, width, length or blank size, flatness needs, surface, quantity, destination port, packing, and MTC/inspection requirements.
This page is galvanized flat sheet only. If you need galvanized bar or section products, open the matching form page instead of this sheet SKU.
Choose sheet when your line needs fixed blanks, limited decoiling capacity, or cut-to-length packages. Choose coil when continuous roll forming or high-yield cutting is preferred.
Yes when coating, surface, and flatness suit the process. For factory pre-painted feed, request PPGI / PPGL coil with RAL and paint system on the color-coated hub.
相關產品
繼續瀏覽塗鍍家族頁，而不是近重複薄 SKU。
產品歸屬
繼續瀏覽 鍍鋅與塗層鋼 產品庫中的同類產品，或直接帶著該產品發起詢盤。
獲取技術與商務報價
請發送牌號、尺寸、數量與目的港，獲取可執行的出口報價路徑。
